ship

Sailing ships

The move to the pure sailing ship came with small but steadily increasing technical innovations that more often allowed ships to sail with the wind behind them. Sails changed from a large square canvas suspended from a single yard (top spar), to complex arrangements intended to pivot on the mast depending on the direction and force of the wind. Instead of being driven solely by the wind direction, ships could “sail into the wind” to the extent that the course taken by a ship became the product of a resolution of forces (the actual wind direction and the objective course of the particular ship). Sails were devised to handle gentle breezes and to gain some mileage from them as well as from strong winds and to maintain some choice as to course while under their influence.

Types of sails

While the speed of a rowed ship was mainly determined by the number of oarsmen in the crew, in sailing ships the total spread of canvas in the sails was the main determinant of speed. Because winds are not fixed either as to direction or as to force, gaining the maximum effective propulsion from them requires complexly variable sails. There was one constant that characterized navigation by sail throughout its history—to gain speed it was necessary to increase the number of masts on the ship. Ships in both the Mediterranean and the north were single-masted until about ad 1400 and likely as well to be rigged for one basic type of sail. With experience square sails replaced the simple lateen sails that were the mainstay during the Middle Ages, particularly in the Mediterranean.

In the earlier centuries of sailing ships the dominant rig was the square sail, which features a canvas suspended on a boom, held aloft by the mast, and hung across the longitudinal axis of the ship. To utilize the shifting relationship between the desired course of the ship and the present wind direction, the square sail must be twisted on the mast to present an edge to the wind. Among other things this meant that most ships had to have clear decks amidships to permit the shifting of the sail and its boom; most of the deck space was thus monopolized by a single swinging sail. Large sails also required a sizable gang of men to raise and lower the sail (and, when reef ports were introduced, to reef the sail, that is, to reduce its area by gathering up the sail at the reef points).

By 1200 the standard sailing ship in the Mediterranean was two-masted, with the foremast larger and hung with a sail new to ordinary navigation at sea. This was the lateen sail, earlier known to the Egyptians and sailors of the eastern Mediterranean. The lateen sail is triangular in shape and is fixed to a long yard mounted at its middle to the top of the mast. The combination of sails tended to change over the years, though the second mast often carried a square sail.

One broad classification of sails, which included the lateen, was termed “fore-and-aft” sails—that is, those capable of taking the wind on either their front or back surfaces. Such sails are hung along the longitudinal axis of the ship. By tacking to starboard (the right side) the ship would use the wind from one quarter. Tacking to port (the left side) would use a wind coming from the opposite quarter to attain the same objective.

Asian ships

During this same period China, with its vast land areas and poor road communications, was turning to water for transportation. Starting with a dugout canoe, the Chinese joined two canoes with planking, forming a square punt, or raft. Next, the side, the bow, and the stern were built up with planking to form a large, flat-bottomed wooden box. The bow was sharpened with a wedge-shaped addition below the waterline. At the stern, instead of merely hanging a steering oar over one side as did the Western ships, Chinese shipbuilders contrived a watertight box, extending through the deck and bottom, that allowed the steering oar or rudder to be placed on the centreline, thus giving better control. The stern was built to a high, small platform at the stern deck, later called a castle in the West, so that, in a following sea, the ship would remain dry. Thus, in spite of what to Western eyes seemed an ungainly figure, the Chinese junk was an excellent hull for seaworthiness as well as for beaching in shoal (shallow) water. The principal advantage, however, not apparent from an external view, was great structural rigidity. In order to support the side and the bow planking, the Chinese used solid planked walls (bulkheads), running both longitudinally and transversely and dividing the ship into 12 or more compartments, producing not only strength but also protection against damage.

In rigging the Chinese junk was far ahead of Western ships, with sails made of narrow panels, each tied to a sheet (line) at each end so that the force of the wind could be taken in many lines rather than on the mast alone; also, the sail could be hauled about to permit the ship to sail somewhat into the wind. By the 15th century junks had developed into the largest, strongest, and most seaworthy ships in the world. Not until about the 19th century did Western ships catch up in performance.

Early oceanic navigation

The rise of oceanic navigation began when the basic Mediterranean trading vessel, the Venetian buss (a full-bodied, rounded two-masted ship), passed through the Strait of Gibraltar. At the time of Richard I of England (reigned 1189–99), whose familiarity with Mediterranean shipping stemmed from his participation in the Crusades, Mediterranean navigation had evolved in two directions: the galley had become a rowed fighting ship and the buss a sail-propelled trader’s vessel. From Richard’s crusading expeditions the value of the forecastle and aftercastle—giving enclosed deck houses and a bulging bow of great capacity—was learned, and this style became the basis of the English oceangoing trader. These crusading voyages also introduced the English to journeys longer than the coasting and North Sea navigation they had previously undertaken.

The story of European navigation and shipbuilding is in large part one of interaction between technical developments in the two narrow boundary seas. It is thought that sailors from Bayonne in southwestern France introduced the Mediterranean carrack (a large three-masted, carvel-build ship using both square and lateen sails) to northern Europe and in turn introduced the double-ended clinker ship of the north to the Mediterranean. This crossfertilization took place in the 14th century, a time of considerable change in navigation in the Atlantic-facing regions of France, Spain, and Portugal.

Changes in shipbuilding during the Middle Ages were gradual. Among northern ships the double-ended structure began to disappear when sailing gained dominance over rowing. To make best use of sails meant moving away from steering oars to a rudder, first attached to the side of the boat and then, after a straight stern post was adopted, firmly attached to that stern. By 1252 the Port Books of Damme in Flanders distinguished ships with rudders on the side from those with stern rudders.

The arts of navigation were improving at the same time. The compass was devised at the beginning of the 14th century, but it took time to understand how to use it effectively in a world with variable magnetic declinations. It was only about the year 1400 that the lodestone began to be used in navigation in any consistent manner.

15-century ships and shipping

The early 15th century saw the rise of the full-rigged ship, which had three masts and five or six sails. At the beginning of that century Europe and Asia were connected by caravan routes over land. The galleys or trade ships were long, low-sided, commonly rowed for much of their voyage, and guided by successive landfalls with little need for the compass and mathematical navigation. By the end of the century Da Gama, Columbus, and Cabot had made their revolutionary journeys, the Portuguese had organized the first school of oceanic navigation, and trade had begun to be global.

“Full-rigged” ships were introduced because trade was becoming larger in scale, more frequent in occurrence, and more distant in destination. There was no way to enlarge the propulsive force of ships save by increasing the area of sail. To pack more square yards of canvas on a hull required multiple masts and lofting more and larger sails on each mast. As multiple masts were added, the hull was elongated; keels were often two and a half times as long as the ship’s beam (width). At the beginning of the 15th century large ships were of about 300 tons; by 1425 they were approximately 720 tons.

In the 16th century the full-rigged ship was initially a carrack, a Mediterranean three-master perhaps introduced from Genoa to England. The trade between the Mediterranean and England was carried on at Southampton largely by these carracks. As the years passed the galleon became the most distinctive vessel. This was most commonly a Spanish ship riding high out of the water. Although the name suggested a large galley, galleons probably never carried oars and were likely to be four-masted.

In earlier centuries ships were often merchantmen sufficiently armed to defend themselves against pirates, privateersmen, and the depredations of an active enemy. In peacetime a ship would go about its business as a nation’s trader, but it was able to become a fighting vessel if necessary. When the size of guns and the numbers involved grew to create an offensive capability, there remained little space to carry the volume of goods required by a trader. What resulted was the convoy, under which merchantmen would be protected by specialized naval ships. The distinction between warship and trading ship might have remained quite abstract had not the theory and tactics of warfare changed. Most medieval wars were either dynastic or religious, and armies and navies were small by modern standards. But beginning with the warfare between the Dutch and the English in the 17th century, conflict was the result of competition in trade rather than in sovereignty and faith. Thus, the major trading nations came to dominate ship design and construction.

17th-century developments

With the emergence of the eastern trade about 1600 the merchant ship had grown impressively. The Venetian buss was rapidly supplanted by another Venetian ship, the cog. A buss of 240 tons with lateen sails was required by maritime statutes of Venice to be manned by a crew of 50 sailors. The crew of a square-sailed cog of the same size was only 20 sailors. Thus began an effort that has characterized merchant shipping for centuries—to reduce crews to the minimum. This was particularly true of oceanic navigation, because larger crews were expensive to pay and to provision—and the large amounts of provisions necessary were sometimes critical on long voyages.

In the north, vessels were commonly three-masted by the 16th century. These were the ships that Cabot used to reach Newfoundland and Drake, Frobisher, and Raleigh sailed over the world’s oceans. Raleigh wrote that the Dutch ships of the period were so easy to sail that a crew one-third the size used in English craft could operate them. Efforts were made to accomplish technical improvements on English copies of Venetian and Genoese traders. These ultimately resulted in the East Indiaman of the 17th century. This large and costly ship was intended to be England’s entry in a fierce competition with the Dutch for the trade of India and the Spice Islands.

When Europeans began to undertake trading voyages to the East, they encountered an ancient and economically well-developed world. In establishing a sea link with the East, European merchants could hope to get under way quickly using the producers already resident there and the goods in established production. What resulted were European “factories,” settlements for trade established on coasts at places such as Bombay, Madras, and Calcutta. Some European merchants settled there, but there was no large-scale migration; production of the goods followed established procedures and remained in Asian hands. In contrast, in the New World of America and Australia there was so little existing production of trading goods that the establishment of ties required not only the pioneering of the trading route but also the founding of a colony to create new production. Shipping was critical in each of these relationships but became larger and more continuous in the case of the colonies.

Competition was fierce among the Europeans for the riches of the overseas trade. As the voyages were frequently undertaken by trading consortia from within the chartered company, a great deal is known about the profits of individual round-trips. Standard profits were 100 percent or more. In the accumulation of capital, by countries and by individuals, this mercantile activity was of the utmost importance. Holland’s “Golden Century” was the 17th, and England’s overtaking of France as Europe’s seat of industry also occurred then. The English realized quickly that their merchant ships had to carry enough cannon and other firepower to defend their factories at Bombay and elsewhere and to ward off pirates and privateers on the long voyage to and from the East. In India the English contested trading concessions particularly with France and Portugal; in the East Indian archipelago the contest was with the Dutch and the Portuguese; and in China it was with virtually all maritime powers in northern and western Europe. The result was that the East India merchantmen were very large ships, full-rigged and multimasted, and capable of sailing great distances without making a port.

To secure the strength and competence of these great merchant ships, advances in shipbuilding were necessary. The money was there: profits of 218 percent were recorded over five years, and even 50 percent profit could be earned in just 20 months. Among those undertaking more scientific construction was the British shipbuilder Phineas Pett (1570–1647). Much fine shipbuilding emerged, including ships of the English East India Company, but the company began to freeze its designs too early, and its operating practices were a combination of haughty arrogance and lordly corruption. Captains were appointed who then let out the functioning command to the highest bidder. Education was thin, treatment of sailors despicable, and reverence for established practice defeated the lessons of experience. The merchantmen had to carry large crews to have available the numbers to make them secure against attack. But lost in this effort for security was the operating efficiency that a sound mercantile marine should seek.

It was left more to other maritime markets to develop improvements in merchantmen after the early 17th century. The Dutch competitors of England were able to build and operate merchant ships more cheaply. In the 16th century the sailing ship in general service was the Dutch fluyt, which made Holland the great maritime power of the 17th century. A long, relatively narrow ship designed to carry as much cargo as possible, the fluyt featured three masts and a large hold beneath a single deck. The main and fore masts carried two or more square sails and the third mast a lateen sail. Only at the conclusion of the century, when the Dutch had been decisively defeated in the Anglo-Dutch trading wars, did England finally succeed to the role of leading merchant marine power in the world.

That role was gained in part because Oliver Cromwell restricted English trade to transport in English craft. In 1651 laws were initiated by Cromwell to deal with the low level of maritime development in England. The so-called Navigation Act sought to overcome conditions that had originated in the late Middle Ages when the Hanseatic League, dominating trade in the Baltic and northern Europe, carried most of Britain’s foreign seaborne trade. When the Hansa declined in power in the 16th century the Dutch, just then beginning to gain independence from Spain politically and from Portugal in trade, gained a major part of the English carrying trade. The Navigation Act initiated a rapid change in that pattern. After the restoration of the Stuart monarchy, English shipping nearly doubled in tonnage between 1666 and 1688. By the beginning of the 18th century Britain had become the greatest maritime power and possessed the largest merchant marine until it lost that distinction to the Americans in the mid-19th century.

A further factor in the growth of national merchant marines was the increasing enforcement of the law of cabotage in the operations of the mercantile powers of northern and western Europe with respect to their rapidly expanding colonial empires. Cabotage was a legal principle first enunciated in the 16th century by the French. Navigation between ports on their coasts was restricted to French ships; this principle was later extended to apply to navigation between a metropolitan country and its overseas colonies. This constituted a restriction of many of the world’s trade routes to a single colonial power. It became clear that a power seeking an advantage in shipping would be amenable to supporting the cost and fighting that gaining such colonies might require.

Geographic knowledge gained economic and political value in these conditions. It was in the 17th century that the Dutch, the French, and the English began trying to fill out the map of the known oceans. Islands and coastlines were added to sailing charts almost on an annual basis. By the mid-18th century all the world’s shorelines not bound by sea ice, with fairly minor exceptions, were charted. Only Antarctica remained hidden until the mid-19th century.

Shipping in the 19th century

Once the extent and nature of the world’s oceans was established, the final stage of the era of sail had been reached. American independence played a major role determining how the final stage developed.

To understand why this was so, it should be appreciated that Britain’s North American colonies were vital to its merchant marine, for they formed a major part of its trading empire as customers for British goods. Under mercantilist economic doctrine, colonies were intended as a source of raw materials and as a market for manufactured goods produced in the metropolitan country. Maine, New Hampshire, Nova Scotia, and New Brunswick were rich in naval stores and timber for inexpensive hulls, masts, and spars. And the Navigation Act as amended also granted to the merchant fleets in British North America a monopoly on the transport of goods and passengers within the British Empire. When the United States became independent in 1783 the former colonies were rigidly denied access to the British metropolitan and colonial markets. The substantial trade that had tied Boston to Newfoundland and the British West Indies was severed, leaving the Americans to find an alternative trading system as quickly as possible. New England and the Middle Atlantic states, where there were significant fleets of sailing ships, turned to the Atlantic and Mediterranean islands as well as to Mauritius and to China. In this way, the merchants in the American ports created direct competition to the British East India Company. In doing so, they needed ships that could sail in the Far Eastern trade without the protection of the British navy and that could operate more efficiently and economically than those of the East India Company.

The British East Indiamen were extravagantly expensive to build. Contracts for their construction were awarded by custom and graft. Captains were appointed by patronage rather than education or professional qualifications. And the journeys to Canton, China, from England in East Indiamen were slow in a trade where fast passages were of value, for example, in guarding the quality of the tea being carried. American merchants were fully aware of these failings of the company and its ships. They set out to gain a foothold in the trade through innovations, particularly after the East India Company’s monopoly in Britain’s China trade was abolished in 1833.

British shipping remained rather stagnant after the development of the East Indiaman in the 17th century. The Dutch became the innovators in the second half of the 17th century and maintained that status until the outbreak of the Napoleonic Wars. The British East India Company was paying £40 a ton for ships whereas other owners paid only £25. In the 19th century American shipbuilders studied basic principles of sail propulsion and built excellent ships more cheaply. They also studied how to staff and operate them economically. The Americans began to see that even larger ships (that is, longer in relation to breadth) could carry more sail and thereby gain speed and the ability to sail well under more types of winds. For perishable cargoes speed meant that these fast ships reached British and European markets before those of their competitors and with a product in better condition.

In the 25 years after 1815 American ships changed in weight from 500 to 1,200 tons and in configuration from a hull with a length 4 times the beam to one with a ratio of 5 ¹/₂ to 1. The faster and thus shorter journeys meant that the shipowner could earn back his investment in two or three years. The Mayflower had taken 66 days to cross the Atlantic in 1620. The Black Ball Lines’ nine-year average as of 1825 was 23 days from Liverpool to New York City. Twenty years later Atlantic ships had doubled in size and were not credited as a success unless they had made at least a single east-bound dash of 14 days or less.

The culmination of these American innovations was the creation of a hull intended primarily for speed, which came with the clipper ships. Clippers were long, graceful three-masted ships with projecting bows and exceptionally large spreads of sail. The first of these, the Rainbow, was built in New York in 1845. It was followed by a number of ships built there and in East Boston particularly intended for the China-England tea trade, which was opened to all merchant marines by the late 1840s. Subsequently the Witch of the Wave (an American clipper) sailed from Canton to Deal in England in 1852 in just 90 days. Similar feats of sailing were accomplished in Atlantic crossings. In 1854 the Lightning sailed 436 miles in a day, at an average speed of 18 ¹/₂ knots.

By 1840, however, it was clear that the last glorious days of the sailing ship were at hand. Pure sailing ships were in active use for another generation, while the earliest steamships were being launched. But by 1875 the pure sailer was disappearing, and by the turn of the 20th century the last masts on passenger ships had been removed.