Abstract
The production of waste materials during energy recovery processes is an unavoidable consequence of the need for energy; consequently, safe and efficient disposal or reuse alternatives for these waste materials is essential for sustainable development. For waste streams that must be geologically disposed, the largest volumes of energy related waste include Coal Combustion Products (CCPs) such as fly ash, coal mining wastes, and processed water and drill cuttings from oil and gas exploration, with relatively small amounts of silica resulting from pipe scaling in geothermal energy production. The fate of the vast majority of these energy-related wastes is geologic disposal, which ranges from placement in landfills (lined or unlined) or surface impoundments, to deep injection within geologic units. Applications for productive reuse of energy-related wastes are cost effective alternatives to disposal, and are gaining popularity as sustainability of processing becomes more critical. This review paper examines geologic disposal and reuse of energy-related waste streams within the U.S., and provides insight into fuel-to-waste production ratios, preferred disposal or productive reuse alternatives, and associated geotechnical/environmental considerations.
Similar content being viewed by others
References
Abbe, O. E., Grimes, S. M., Fowler, G. D., and Boccaccini, A. R. (2009). “Novel sintered glass-ceramics from vitrified oil well drill cuttings.” Journal of Materials Science, Vol. 44, No. 16, pp. 4296–4302.
ACAA (2009). “2008 Coal Combustion Product (CCP) production & use survey.” American Coal Ash Association; Aurora, CO; url: http://acaa.affiniscape.com/displaycommon.cfm?an=1♪barticlenbr=3; accessed on: 04/21/2010.
ACAA (2010). “2009 Coal Combustion Product (CCP) production & use survey.” American Coal Ash Association; Aurora, CO; url: http://acaa.affiniscape.com/displaycommon.cfm?an=1♪barticlenbr=3; accessed on: 01/16/2011.
ACAA (2011). Coal combustion products production & use statistics; url: http://acaa.affiniscape.com/displaycommon.cfm?an=1♪barticlenbr=3; accessed on: 01/18/2011.
Adriano, D. C., Page, A. L., Elseewi, A. A., Chang, A. C., and Straughan, I. (1980). “Utilization and disposal of fly-ash and other coal residues in terrestrial ecosystems — A review.” Journal of Environmental Quality, Vol. 9, No. 3, pp. 333–344.
AECOM (2009). Root cause analysis of TVA kingston dredge pond failure on December 22, 2008, AECOM; Project No. 60095742; Volume I; url: http://www.tva.com/kingston/rca/; accessed on: 06/22/2010.
Ahmaruzzaman, M. (2010). “A review on the utilization of fly ash.” Progress in Energy and Combustion Science, Vol. 36, No. 3, pp. 327–363.
API (2000). Overview of exploration and production waste volumes and waste management practices in the United States, The American Petroleum Institute; url: http://www.api.org/aboutoilgas/sectors/explore/waste-management.cfm; accessed on: 06/17/2010.
Basu, M., Pande, M., Bhadoria, P. B. S., and Mahapatra, S. C. (2009). “Potential fly-ash utilization in agriculture: A global review.” Progress in Natural Science, Vol. 19, No. 10, pp. 1173–1186.
Baykal, G., Edincliler, A., and Saygili, A., (2004). “Highway embankment construction using fly ash in cold regions.” Resources Conservation and Recycling, Vol. 42, No. 3, pp. 209–222.
Bian, Z. F., Dong, J. H., Lei, S. G., Leng, H. L., Mu, S. G., and Wang, H. (2009). “The impact of disposal and treatment of coal mining wastes on environment and farmland.” Environmental Geology, Vol. 58, No. 3, pp. 625–634.
Bonaparte, R., Daniel, D., and Koerner, R. (2002). Assessment and recommendations for improving the performance of waste containment systems, Environmental Protection Agency; Washignton, D.C.; url: http://people.engr.ncsu.edu/barlaz/resources/waste%20containment%20title.pdf; accessed on: 01/22/2011.
BP (2010). Statistical review of world energy June 2010; url: http://www.bp.com/productlanding.do?categoryId=6929&contentId=7044622; accessed on: 07/08/2010.
CCSD (2006). Use of coal ash in mine backfill and related applications, Cooperative Research Center for Coal in Sustainable Development; Research Report 62; Pullenville, Australia; url: http://www.ccsd.biz/publications/files/RR/RR62%20Mine%20Backfill%20Literature%20Review%20formatted.pdf; accessed on: 05/28/2010.
Choi, S. K., Lee, S., Song, Y. K., and Moon, H. S., (2002). “Leaching characteristics of selected Korean fly ashes and its implications for the groundwater composition near the ash disposal mound.” Fuel, Vol. 81, No. 8, pp. 1083–1090.
E&P Forum (1993). Exploration and Production (E&P) waste management guidelines, E&P Forum; Report No. 2.58/196; London, U.K.; url: http://www.deq.state.la.us/portal/Portals/0/permits/sw/ePwaste%20magt%20gdlns%201993.pdf; accessed on: 06/17/2010.
Edgar, T. F. (1983). “Coal processing and pollution control.” Gulf Publishing Company, Houston, Texas, p. 579.
EIA (2009). Coal reserves current and back issues; url: http://www.eia.doe.gov/cneaf/coal/reserves/reserves.html; accessed on: 01/11/2011.
EIA (2010a). Annual coal report 2008, U.S. Energy Information Administration; Department of Energy DOE/EIA-0584 (2008); Washington, DC; url: http://www.eia.doe.gov/cneaf/coal/page/acr/acr.pdf; accessed on: 06/15/2010.
EIA (2010b). Annual energy review 2009, U.S. Energy Information Administration; Department of Energy DOE/EIA-0384(2009); Washington, DC; url: http://www.eia.doe.gov/aer/pdf/aer.pdf; accessed on: 01/14/2011.
Escalante, J. I., Mendoza, G., Mancha, H., Lopez, J., and Vargas, G. (1999). “Pozzolanic properties of a geothermal silica waste material.” Cement and Concrete Research, Vol. 29, No. 4, pp. 623–625.
Ganesan, K., Rajagopal, K., and Thangavel, K. (2007). “Evaluation of bagasse ash as supplementary cementitious material.” Cement & Concrete Composites, Vol. 29, No. 6, pp. 515–524.
Gao, Y. M., Shim, H. S., Hurt, R. H., and Suuberg, E. M. (1997). “Effects of carbon on air entrainment in fly ash concrete: The role of soot and carbon black.” Energy & Fuels, Vol. 11, No. 2, pp. 457–462.
Gomez-Zamorano, L. Y., Escalante-Garcia, J. I., and Mendoza-Suarez, G. (2004). “Geothermal waste: An alternative replacement material of Portland cement.” Journal of Materials Science, Vol. 39, No. 12, pp. 4021–4025.
Hall, M. L. and Livingston, W. R. (2002). “Fly ash quality, past, present and future, and the effect of ash on the development of novel products.” Proc. International Workshop on Novel Products from Combustion Residues, Morella, Spain, Vol. 77, pp. 234–239.
Hill, R. L., Sarkar, S. L., Rathbone, R. F., and Hower, J. C. (1997). “An examination of fly ash carbon and its interactions with air entraining agent.” Cement and Concrete Research, Vol. 27, No. 2, pp. 193–204.
Kim, B. and Prezzi, M. (2008). “Evaluation of the mechanical properties of class-F fly ash.” Waste Management, Vol. 28, No. 3, pp. 649–659.
Kim, B., Prezzi, M., and Salgado, R. (2005). “Geotechnical properties of fly and bottom ash mixtures for use in highway embankments.” Journal of Geotechnical and Geoenvironmental Engineering, Vol. 131, No. 7, pp. 914–924.
Kulaots, I., Hsu, A., Hurt, R. H., and Suuberg, E. M. (2003). “Adsorption of surfactants on unburned carbon in fly ash and development of a standardized foam index test.” Cement and Concrete Research, Vol. 33, No. 12, pp. 2091–2099.
Kutchko, B. G. and Kim, A. G. (2006). “Fly ash characterization by SEM-EDS.” Fuel, Vol. 85, Nos. 17–18, pp. 2537–2544.
Leonard, S. A. and Stegemann, J. A. (2010). “Stabilization/solidification of petroleum drill cuttings.” Journal of Hazardous Materials, Vol. 174, Nos. 1–3, pp. 463–472.
Mishra, M. K. and Karanam, U. M. R. (2006). “Geotechnical characterization of fly ash composites for backfilling mine voids.” Geotechnical and Geological Engineering, Vol. 24, No. 6, pp. 1749–1765.
Mulder, E. (1996). “A mixture of fly ashes as road base construction material.” Waste Management, Vol. 16, Nos. 1–3, pp. 15–20.
Multilateral Investment Group (2007). Coal mining and production; url: http://www.miga.org/documents/CoalMiningandProduction.pdf; accessed on: 07/27/2010.
Nadeem, M. and Dusseault, M. B. (2007). “Geological engineering criteria for deep solids injection.” Environmental Geosciences, Vol. 14, No. 2, pp. 61–77.
NRC (2006). Managing coal combustion residues in mines, National Academy Press, National Research Council (U.S.), Washington, D.C.
NRC (2007). Assessment of the performance of engineered waste containment barriers, National Research Council; National Academy Press, Washington, D.C., p. 134.
Pandey, V. C. and Singh, N. (2010). “Impact of fly ash incorporation in soil systems.” Agriculture Ecosystems & Environment, Vol. 136, Nos. 1–2, pp. 16–27.
Pedersen, K. H., Jensen, A. D., Skjoth-Rasmussen, M. S. and Dam-Johansen, K. (2008). “A review of the interference of carbon containing fly ash with air entrainment in concrete.” Progress in Energy and Combustion Science, Vol. 34, No. 2, pp. 135–154.
Rowe, R. K. (2005). “Long-term performance of contaminant barrier systems, 45th Rankine Lecture.” Geotechnique, Vol. 55, No. 9, pp. 631–678.
Ruhl, L., Vengosh, A., Dwyer, G. S., Hsu-Kim, H., Deonarine, A., Bergin, M., and Kravchenko, J. (2009). “Survey of the potential environmental and health impacts in the immediate aftermath of the coal ash spill in kingston, tennessee.” Environmental Science & Technology, Vol. 43, No. 16, pp. 6326–6333.
Rumer, R. R. and Mitchell, J. K. (1995). “Assessment of barrier containment technologies: A comprehensive treatment for environmental remediation applications.” Proc. International Containment Technology Workshop, Baltimore, MD.
Shang, J. Q., Wang, H. L., Kovac, V., and Fyfe, J. (2006). “Site-specific study on stabilization of acid-generating mine tailings using coal fly ash.” Journal of Materials in Civil Engineering, Vol. 18, No. 2, pp. 140–151.
Sporel, F., Uebachs, S., and Brameshuber, W. (2009). “Investigations on the influence of fly ash on the formation and stability of artificially entrained air voids in concrete.” Materials and Structures, Vol. 42, No. 2, pp. 227–240.
Taheripour, F., Hertel, T. W., Tyner, W. E., Beckman, J. F., and Birur, D. K. (2010). “Biofuels and their by-products: Global economic and environmental implications.” Biomass & Bioenergy, Vol. 34, No. 3, pp. 278–289.
The World Bank Group (1998). “Coal mining and production.” In: Pollution Prevention and Abatement Handbook: The International Bank for Reconstruction and Development/The World Bank, Washington DC.
Tomasko, D., Elcock, D., Veil, J., and Caudle, D. (1997). Risk analyses for disposing nonhazardous oil field wastes in salt caverns, Argonne National Laboratory; DOE Contract W-31-109-ENG-38; Argonne, IL; url: http://www.evs.anl.gov/pub/doc/saltrisk.pdf; accessed on: 06/17/2010.
Ugurlu, A. (2004). “Leaching characteristics of fly ash.” Environmental Geology, Vol. 46, Nos. 6–7, pp. 890–895.
US EPA (1994). Technical report: Design and evaluation of tailings dams, U.S. Environmental Protection Agency; EPA 530-R-94-038; Washington, DC; url: http://www.epa.gov/osw/nonhaz/industrial/special/mining/techdocs/tailings.pdf; accessed on: 06/17/2010.
US EPA (2009). Geothermal energy production wastes; url: http://www.epa.gov/rpdweb00/tenorm/geothermal.html; accessed on: 07/07/2010.
Veil, J. A. (2001). New technologies for managing oil field waste, American Society of Mechanical Engineers Energy Technology Conference and Exhibition: Houston, TX.
Veil, J. A. (2003). “Innovative technologies for managing oil field waste.” Journal of Energy Resources Technology-Transactions of the Asme, Vol. 125, No. 3, pp. 238–248.
Wang, S. Z. and Baxter, L. (2007). “Comprehensive study of biomass fly ash in concrete: Strength, microscopy, kinetics and durability.” Fuel Processing Technology, Vol. 88, Nos. 11–12, pp. 1165–1170.
WEC (2007). 2007 survey of energy resources, World Energy Council 2007; url: http://www.worldenergy.org/documents/ser2007_final_online_version_1.pdf; accessed on: 06/17/2010.
WEC (2010). 2010 survey of energy resources, World Energy Council; url: http://www.worldenergy.org/documents/ser_2010_report_1.pdf; accessed on: 01/15/2010.
Willis, J. M., Hester, M. W. and Shaffer, G. P. (2005). “A mesocosm evaluation of processed drill cuttings for wetland restoration.” Ecological Engineering, Vol. 25, No. 1, pp. 41–50.
Yeheyis, M. B., Shang, J. Q., and Yanful, E. K. (2009). “Long-term evaluation of coal fly ash and mine tailings co-placement: A sitespecific study.” Journal of Environmental Management, Vol. 91, No. 1, pp. 237–244.
Yoon, S., Balunaini, U., Yildirim, I. Z., Prezzi, M., and Siddiki, N. Z. (2009). “Construction of an embankment with a fly and bottom ash mixture: Field performance study.” Journal of Materials in Civil Engineering, Vol. 21, No. 6, pp. 271–278.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Yeboah, N.N.N., Burns, S.E. Geological disposal of energy-related waste. KSCE J Civ Eng 15, 697–705 (2011). https://doi.org/10.1007/s12205-011-0010-x
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12205-011-0010-x